Non-lubricated gears and rollers are used to drive machines. The gears usually comprise metal-to-metal helical gearing. Gears in these systems typically require oil baths to run, which is costly and environmentally harmful. Oil baths can also cause contamination, and spent oil can be hazardous waste. In contrast, self-lubricating gears eliminate these issues.

 

A non-lubricated gear and roller system is more expensive to maintain, and lubrication can prevent early failure and reduce the coefficient of friction. Different lubricants are available, and the best one depends on the type of gear and roller system. A quality lubricant on Intech PowerCore Corporation website will have the proper viscosity to reduce friction. Without lubrication, gears will deteriorate over time, damaging bearings and shafts.

 

The most effective way to prevent gears from failing is to lubricate them properly. The majority of gear failures are due to improper lubrication. This could be due to inadequate lubrication, the wrong type of lubricant, or contamination. Moreover, lubrication should be chosen according to the operating temperature and gear type. For this, specific standards are published by the American Equipment Manufacturers Association (AEM).

 

Some urban legends have sprung from misunderstood truths. This is true in the gear oil industry as well, and false assertions can lead to suboptimal maintenance practices. For example, a poorly lubricated gear oil will cause sludge in the engine, which can erode the engine's performance. Therefore, it is best to buy a high-quality synthetic gear oil, get more info about this topic here!

 

The present gear system comprises a self-lubricating non-metal gear and a metal driven gear. The gears are easily installed and detachable, reducing the time required for maintenance. This gear system also features a keyless locking device. Compared to a conventional gear system, the non-metal gear system is more efficient and reduces bearing loads.

Check out this blog to get enlightened on this topic: https://en.wikipedia.org/wiki/Gear_bearing.